|2287||dU SynBase™ CPG 1000/110|
|2293||dI SynBase™ CPG 1000/110|
|2323||5-Me-dC SynBase™ CPG 1000/110|
Physical & Dilution Data
Dilution volumes (in ml) are for 0.1M solutions in dry acetonitrile (4050). Adjust accordingly for other concentrations. For µmol pack sizes, products should be diluted as 100µmol/ml to achieve 0.1M, regardless of molecular weight.
Couple the phosphoramidites 2013, 2016 and 2017 using the standard method as recommended by synthesiser manufacturer with coupling times as per standard bases. 90s is recommended for 2529. A coupling time of 15min is recommended for 2145. A coupling time of 3min is recommended for 2164. The solid supports are used as per standard nucleoside supports.
For 2013, 2016, 2017 and 2529 standard oligonucleotide deprotection conditions can be applied when deprotecting an oligo containing these modifications, however 2013, 2016 and 2529 are also compatible with AMA deprotection; typically 10min at 55oC.
2145 - Use AMA deprotection in conjunction with Ac-dC, rather than Bz-dC, or transamidation will occur. The supports are cleaved and deprotection carried out using the protocols required by the nucleobases.
2164 - Cleavage from support and primary deprotection is accomplished by treatment with ammonium hydroxide solution at room temperature for 24h.
After removing the solution1, the NPE groups are removed by treatment with 0.3M tetramethylguanidinium 2-nitrobenzaldoximate solution in water/dioxan (1:1) at 70°C for 48h. We find that this extended treatment is necessary to ensure complete removal of both of the NPE protecting groups.
It should be noted that this treatment generates a variety of low molecular weight by-products which are observed in the HPLC. Satisfactory results are obtained by de-salting the deprotection mixture into water using a NAP or G25 column before HPLC, from which the final oligonucleotide product can then be isolated.
Storage & Stability
Refrigerate dry compounds. Stability of phosphoramidites in solution is similar to standard dA, dC, dG and dT monomers.
- This is best achieved by removing the deprotection solution by G25 then freeze drying to remove the water. Heat cannot be used or the NPE groups would cleave.